Can't figure out DualBootPro
Forum rules
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
8 posts
• Page 1 of 1
Can't figure out DualBootPro
I purchased DualBootPro, but expected it to come with documentation of some kind. If it's there, I've missed it. I have 2 internal hard drives, one has Windows Vista, one has Windows XP. I've run DualBootPro under each of them, and so far I can only dual boot through the BIOS. The DPB menu is there, but it will only boot to Vista. Do you have step-by-step directions?
Thank you.
Re: Can't figure out DualBootPro
Sorry to hear you are having trouble. This particular problem we have run across numerous of times. Depending on the order of OS installation results in different issues. The help documentation provided with DBP is very limited as trying to discuss all the possible outcomes would take forever. We have setup a Guides section that you can browse if you want.
However, what order did you install the operating systems?
Can you also copy/paste the contents of DBP -> Boot Information -> All. This will allow us to see exactly what is going on. The most likely culprit is that XP is not correctly configured in the Bcd store.
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Can't figure out DualBootPro
I installed Windows XP as a single drive on my computer, then I removed that drive, installed a new drive, and installed Vista on this drive. I then put the XP drive back in. The BIOS lets me select the priority of boot drive, but I would prefer the ease of using DualBootPro. When I boot with the XP drive as priority in the BIOS, it boots right into XP. When I boot with the Vista drive as priority, it boots with a menu that lists Vista and XP, but it will only boot into Vista.
This is the Boot Information from BDP:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
displayorder {current}
{351b6621-fd7f-11df-a713-001731b0325d}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Microsoft Windows Vista
locale en-US
inherit {bootloadersettings}
osdevice partition=C:
systemroot \Windows
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
nx OptIn
Resume from Hibernate
---------------------
identifier {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
pae Yes
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=C:
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
Windows Legacy OS Loader
------------------------
identifier {351b6621-fd7f-11df-a713-001731b0325d}
device partition=G:
path \ntldr
description Windows XP
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Any suggestions would be appreciated.
Linda
This is the Boot Information from BDP:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
displayorder {current}
{351b6621-fd7f-11df-a713-001731b0325d}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Microsoft Windows Vista
locale en-US
inherit {bootloadersettings}
osdevice partition=C:
systemroot \Windows
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
nx OptIn
Resume from Hibernate
---------------------
identifier {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
pae Yes
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=C:
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
Windows Legacy OS Loader
------------------------
identifier {351b6621-fd7f-11df-a713-001731b0325d}
device partition=G:
path \ntldr
description Windows XP
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Any suggestions would be appreciated.
Linda
Re: Can't figure out DualBootPro
Please post a screen shot of your disk management screen with both Harddrives plugged in and let us know what OS you booted into when it was taken, also if it is not evident which disk contains which OS let us know that too
Game Over!!!!!!!!
ASUS Maximus V Gene MB
Windows 8 X64; Windows 7 X64; Windows 7 X86
Intel I5-3570K
16GB Corsair Vengeance Ram
eVGA GeForce GTX 550 TI
Corsair GS700 PS
1TB Seagate SATA 6.0Gb HD
Thermaltake Case
ASUS Maximus V Gene MB
Windows 8 X64; Windows 7 X64; Windows 7 X86
Intel I5-3570K
16GB Corsair Vengeance Ram
eVGA GeForce GTX 550 TI
Corsair GS700 PS
1TB Seagate SATA 6.0Gb HD
Thermaltake Case
- yeshuas
- Software Development
- Posts: 5075
- Joined: Wed Jan 17, 2007 3:29 pm
- Location: Chicago, IL
- Real Name: Daniel Schmidt
Re: Can't figure out DualBootPro
Here is my information again, in case I've made changes since I last posted:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
displayorder {current}
{351b6621-fd7f-11df-a713-001731b0325d}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Microsoft Windows Vista
locale en-US
inherit {bootloadersettings}
osdevice partition=C:
systemroot \Windows
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
nx OptOut
pae ForceDisable
vga No
quietboot No
sos No
debug No
Resume from Hibernate
---------------------
identifier {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
pae Yes
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=C:
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
Windows Legacy OS Loader
------------------------
identifier {351b6621-fd7f-11df-a713-001731b0325d}
device partition=G:
path \ntldr
description Windows XP
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
displayorder {current}
{351b6621-fd7f-11df-a713-001731b0325d}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Microsoft Windows Vista
locale en-US
inherit {bootloadersettings}
osdevice partition=C:
systemroot \Windows
resumeobject {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
nx OptOut
pae ForceDisable
vga No
quietboot No
sos No
debug No
Resume from Hibernate
---------------------
identifier {9f1cf75f-f2ba-11df-8e76-f1ec85a3a6e1}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
pae Yes
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=C:
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
Windows Legacy OS Loader
------------------------
identifier {351b6621-fd7f-11df-a713-001731b0325d}
device partition=G:
path \ntldr
description Windows XP
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Re: Can't figure out DualBootPro
Try this guide it should help you unplugged-xp-drive-for-vista-setup-can-t-dual-boot-to-xp-t84455.html
Game Over!!!!!!!!
ASUS Maximus V Gene MB
Windows 8 X64; Windows 7 X64; Windows 7 X86
Intel I5-3570K
16GB Corsair Vengeance Ram
eVGA GeForce GTX 550 TI
Corsair GS700 PS
1TB Seagate SATA 6.0Gb HD
Thermaltake Case
ASUS Maximus V Gene MB
Windows 8 X64; Windows 7 X64; Windows 7 X86
Intel I5-3570K
16GB Corsair Vengeance Ram
eVGA GeForce GTX 550 TI
Corsair GS700 PS
1TB Seagate SATA 6.0Gb HD
Thermaltake Case
- yeshuas
- Software Development
- Posts: 5075
- Joined: Wed Jan 17, 2007 3:29 pm
- Location: Chicago, IL
- Real Name: Daniel Schmidt
Re: Can't figure out DualBootPro
I purchased DualBootPro,But it not working with windows xp.Inform me anyone what can i do?
- gcramer789
- Posts: 3
- Joined: Sun Feb 27, 2011 8:03 am
Re: Can't figure out DualBootPro
gcramer789 wrote:I purchased DualBootPro,But it not working with windows xp.Inform me anyone what can i do?
We need more information as to what problem you are having, what you have tried, how you got to where you are, what other OS's you have installed, what order they were installed etc.
Game Over!!!!!!!!
ASUS Maximus V Gene MB
Windows 8 X64; Windows 7 X64; Windows 7 X86
Intel I5-3570K
16GB Corsair Vengeance Ram
eVGA GeForce GTX 550 TI
Corsair GS700 PS
1TB Seagate SATA 6.0Gb HD
Thermaltake Case
ASUS Maximus V Gene MB
Windows 8 X64; Windows 7 X64; Windows 7 X86
Intel I5-3570K
16GB Corsair Vengeance Ram
eVGA GeForce GTX 550 TI
Corsair GS700 PS
1TB Seagate SATA 6.0Gb HD
Thermaltake Case
- yeshuas
- Software Development
- Posts: 5075
- Joined: Wed Jan 17, 2007 3:29 pm
- Location: Chicago, IL
- Real Name: Daniel Schmidt
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests