Time countdown to start Win 7 does not work
Forum rules
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
8 posts
• Page 1 of 1
Time countdown to start Win 7 does not work
Time countdown to start Win 7 in dual boot does not seem to work in my installation. Even tho I set the countdown time to be 0 sec for default drive, hit Apply, and rebooted, the countdown still took 30 sec. Next I reset timer to 1 sec for default drive just as a change, hit Apply, and rebooted, the countdown still took 30 sec.
This should not be complex -- what am I missing?
Re: Time countdown to start Win 7 does not work
marv,
After you hit Apply are you receiving any messages? If you exit DBP and then open back up does it still say 30 seconds?
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Time countdown to start Win 7 does not work
marv,
I actually just saw what you were talking about. In the OS list select an entry and then change the boot timeout and hit apply. This will update it. I will add this to the next release to get fixed. Thanks for letting us know.
Jason
I actually just saw what you were talking about. In the OS list select an entry and then change the boot timeout and hit apply. This will update it. I will add this to the next release to get fixed. Thanks for letting us know.
Jason
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Time countdown to start Win 7 does not work
jbullard, I did not receive a message after Apply Update. After exiting and restarting the program, the timeout number was 1 sec, its last setting by me and not the 30 secs that actually occurred.
Jason, I'm surprised that I may be the first person who ever tried to adjust the timeout in this program [and failed]??!!
Appreciate the quick help!!
Jason, I'm surprised that I may be the first person who ever tried to adjust the timeout in this program [and failed]??!!
Appreciate the quick help!!
Re: Time countdown to start Win 7 does not work
marv,
Can you post the contents of Boot Information -> Detailed?
Can you post the contents of Boot Information -> Detailed?
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Time countdown to start Win 7 does not work
The following is my detailed Boot Info:
Boot Mgr shows 31 sec timeout while OS page shows 1 sec.
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
displayorder {current}
{f907f810-20ac-11df-b91d-4061865c9bce}
toolsdisplayorder {memdiag}
timeout 31
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f815-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
nx OptIn
Windows Boot Loader
-------------------
identifier {f907f810-20ac-11df-b91d-4061865c9bce}
device partition=D:
path \windows\system32\winload.exe
description Windows 7 Problem
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f811-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=D:
systemroot \windows
resumeobject {f907f80f-20ac-11df-b91d-4061865c9bce}
nx OptIn
Boot Mgr shows 31 sec timeout while OS page shows 1 sec.
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
displayorder {current}
{f907f810-20ac-11df-b91d-4061865c9bce}
toolsdisplayorder {memdiag}
timeout 31
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f815-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
nx OptIn
Windows Boot Loader
-------------------
identifier {f907f810-20ac-11df-b91d-4061865c9bce}
device partition=D:
path \windows\system32\winload.exe
description Windows 7 Problem
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f811-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=D:
systemroot \windows
resumeobject {f907f80f-20ac-11df-b91d-4061865c9bce}
nx OptIn
Re: Time countdown to start Win 7 does not work
Hrm. This is weird. Both of those get information from the same place. I'm wondering if you have another boot manager entry. Can you post the contents of Boot Information -> All? I guess I should have asked for that one first.
Thanks
Thanks
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Time countdown to start Win 7 does not work
This is All the works:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
displayorder {current}
{f907f810-20ac-11df-b91d-4061865c9bce}
toolsdisplayorder {memdiag}
timeout 31
Windows Boot Loader
-------------------
identifier {f907f810-20ac-11df-b91d-4061865c9bce}
device partition=D:
path \windows\system32\winload.exe
description Windows 7 Problem
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f811-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=D:
systemroot \windows
resumeobject {f907f80f-20ac-11df-b91d-4061865c9bce}
nx OptIn
Windows Boot Loader
-------------------
identifier {f907f811-20ac-11df-b91d-4061865c9bce}
device ramdisk=[D:]\Recovery\f907f811-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f812-20ac-11df-b91d-4061865c9bce}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[D:]\Recovery\f907f811-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f812-20ac-11df-b91d-4061865c9bce}
systemroot \windows
nx OptIn
winpe Yes
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f815-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
nx OptIn
Windows Boot Loader
-------------------
identifier {f907f815-20ac-11df-b91d-4061865c9bce}
device ramdisk=[C:]\Recovery\f907f815-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f816-20ac-11df-b91d-4061865c9bce}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[C:]\Recovery\f907f815-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f816-20ac-11df-b91d-4061865c9bce}
systemroot \windows
nx OptIn
winpe Yes
Resume from Hibernate
---------------------
identifier {f907f80f-20ac-11df-b91d-4061865c9bce}
device partition=D:
path \windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=D:
filepath \hiberfil.sys
debugoptionenabled No
Resume from Hibernate
---------------------
identifier {f907f813-20ac-11df-b91d-4061865c9bce}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{7ff607e0-4395-11db-b0de-0800200c9a66}
Inherited Settings (20200003)
-----------------------------
identifier {7ff607e0-4395-11db-b0de-0800200c9a66}
custom:250000f3 0
custom:250000f4 1
custom:250000f5 115200
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Device options
--------------
identifier {f907f812-20ac-11df-b91d-4061865c9bce}
description Ramdisk Options
ramdisksdidevice partition=D:
ramdisksdipath \Recovery\f907f811-20ac-11df-b91d-4061865c9bce\boot.sdi
Device options
--------------
identifier {f907f816-20ac-11df-b91d-4061865c9bce}
description Ramdisk Options
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\f907f815-20ac-11df-b91d-4061865c9bce\boot.sdi
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
displayorder {current}
{f907f810-20ac-11df-b91d-4061865c9bce}
toolsdisplayorder {memdiag}
timeout 31
Windows Boot Loader
-------------------
identifier {f907f810-20ac-11df-b91d-4061865c9bce}
device partition=D:
path \windows\system32\winload.exe
description Windows 7 Problem
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f811-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=D:
systemroot \windows
resumeobject {f907f80f-20ac-11df-b91d-4061865c9bce}
nx OptIn
Windows Boot Loader
-------------------
identifier {f907f811-20ac-11df-b91d-4061865c9bce}
device ramdisk=[D:]\Recovery\f907f811-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f812-20ac-11df-b91d-4061865c9bce}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[D:]\Recovery\f907f811-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f812-20ac-11df-b91d-4061865c9bce}
systemroot \windows
nx OptIn
winpe Yes
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {f907f815-20ac-11df-b91d-4061865c9bce}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {f907f813-20ac-11df-b91d-4061865c9bce}
nx OptIn
Windows Boot Loader
-------------------
identifier {f907f815-20ac-11df-b91d-4061865c9bce}
device ramdisk=[C:]\Recovery\f907f815-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f816-20ac-11df-b91d-4061865c9bce}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[C:]\Recovery\f907f815-20ac-11df-b91d-4061865c9bce\Winre.wim,{f907f816-20ac-11df-b91d-4061865c9bce}
systemroot \windows
nx OptIn
winpe Yes
Resume from Hibernate
---------------------
identifier {f907f80f-20ac-11df-b91d-4061865c9bce}
device partition=D:
path \windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=D:
filepath \hiberfil.sys
debugoptionenabled No
Resume from Hibernate
---------------------
identifier {f907f813-20ac-11df-b91d-4061865c9bce}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{7ff607e0-4395-11db-b0de-0800200c9a66}
Inherited Settings (20200003)
-----------------------------
identifier {7ff607e0-4395-11db-b0de-0800200c9a66}
custom:250000f3 0
custom:250000f4 1
custom:250000f5 115200
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Device options
--------------
identifier {f907f812-20ac-11df-b91d-4061865c9bce}
description Ramdisk Options
ramdisksdidevice partition=D:
ramdisksdipath \Recovery\f907f811-20ac-11df-b91d-4061865c9bce\boot.sdi
Device options
--------------
identifier {f907f816-20ac-11df-b91d-4061865c9bce}
description Ramdisk Options
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\f907f815-20ac-11df-b91d-4061865c9bce\boot.sdi
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests