Dualbootpro does NOT start
Forum rules
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
17 posts
• Page 2 of 2 • 1, 2
Re: Dualbootpro does NOT start
Okay. I am going to need some information then.
1. Open the Windows 7 partition and go to the Windows\System32 directory
2. Copy the file bcdedit.exe from there into your XP Windows\System32 directory
3. Launch command prompt (Win Key + R, or Start Menu -> Accessories -> Command Prompt)
4. Type in bcdedit -enum ALL
5. Copy and paste that here.
If you have all the system requirements for DBP then there should be no reason it won't start unless there is a problem with the bcd store. This will allow us to see the exact problem and provide a solution and incorporate that into DBP.
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Dualbootpro does NOT start
here ist is:
C:\Dokumente und Einstellungen\RP>bcdedit -enum ALL
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=C:
description Windows Boot Manager
locale de-DE
inherit {globalsettings}
default {ntldr}
resumeobject {cb64481e-e904-11de-9536-ed3d99c425d2}
displayorder {ntldr}
{cb64481f-e904-11de-9536-ed3d99c425d2}
toolsdisplayorder {memdiag}
timeout 20
Windows Boot Loader
-------------------
identifier {cb64481f-e904-11de-9536-ed3d99c425d2}
device partition=N:
path \Windows\system32\winload.exe
description Windows 7
locale de-DE
inherit {bootloadersettings}
recoverysequence {cb644820-e904-11de-9536-ed3d99c425d2}
recoveryenabled Yes
osdevice partition=N:
systemroot \Windows
resumeobject {cb64481e-e904-11de-9536-ed3d99c425d2}
nx OptIn
Windows Boot Loader
-------------------
identifier {cb644820-e904-11de-9536-ed3d99c425d2}
device ramdisk=[N:]\Recovery\cb644820-e904-11de-9536-ed3d99c425
d2\Winre.wim,{cb644821-e904-11de-9536-ed3d99c425d2}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[N:]\Recovery\cb644820-e904-11de-9536-ed3d99c425
d2\Winre.wim,{cb644821-e904-11de-9536-ed3d99c425d2}
systemroot \windows
nx OptIn
winpe Yes
Resume from Hibernate
---------------------
identifier {cb64481e-e904-11de-9536-ed3d99c425d2}
device partition=N:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale de-DE
inherit {resumeloadersettings}
filedevice partition=N:
filepath \hiberfil.sys
pae Yes
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=C:
path \boot\memtest.exe
description Windows-Speicherdiagnose
locale de-DE
inherit {globalsettings}
badmemoryaccess Yes
Windows Legacy OS Loader
------------------------
identifier {ntldr}
device partition=C:
path \ntldr
description WINDOWS XP
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}
Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Device options
--------------
identifier {cb644821-e904-11de-9536-ed3d99c425d2}
description Ramdisk Options
ramdisksdidevice partition=N:
ramdisksdipath \Recovery\cb644820-e904-11de-9536-ed3d99c425d2\boot.sdi
C:\Dokumente und Einstellungen\RP>^A
Big THX
Reinhold
Re: Dualbootpro does NOT start
Reinhold,
Everything is fine here. I cannot find any problems with your BCD registry so this points to a bad install of .NET 2.0. I would download the file from the below location. Uninstall the current .NET install, reboot, and then run/install this file.
http://www.microsoft.com/downloads/deta ... laylang=en
Everything is fine here. I cannot find any problems with your BCD registry so this points to a bad install of .NET 2.0. I would download the file from the below location. Uninstall the current .NET install, reboot, and then run/install this file.
http://www.microsoft.com/downloads/deta ... laylang=en
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Dualbootpro does NOT start
thanks, i did it, but it didn't work, maybe for some other reason.
I installed it now on the windows 7 partition and it's ok.
Reinhold
I installed it now on the windows 7 partition and it's ok.
Reinhold
Re: Dualbootpro does NOT start
Reinhold,
It is still really odd that you can't get it to run under XP. Let me do some more testing to see if I can't find what the problem is.
It is still really odd that you can't get it to run under XP. Let me do some more testing to see if I can't find what the problem is.
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
Re: Dualbootpro does NOT start
finally I got it. Now the program starts. The fault was: segoe UI font was not available in the "regular" version, in german "standard".
after a installation of the missing font everything works fine!
Best wishes,
Reinhold
after a installation of the missing font everything works fine!
Best wishes,
Reinhold
Re: Dualbootpro does NOT start
Reinhold,
Thanks for the update. I will get that fixed in the next version. It should not force Segoe UI.
Thanks for the update. I will get that fixed in the next version. It should not force Segoe UI.
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
17 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 1 guest