VBPro problem with "Index count"
Forum rules
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
This forum is meant for support of PRO Software only. PROnetworks reserves the right to edit any topic title to better explain the contents of a post. We also may move your post to a more suitable forum if necessary.
It may take our support staff up to 24 hours to respond to your problem. We appreciate your patience.
3 posts
• Page 1 of 1
VBP not loading bcd for me either...
I am having the same trouble. "Index and count must refer to a location blabla....
My enum all is below...I have 2 drives, one 250GB with XP SP2 and a new install of Vista RC1 on it...The 2nd drive is just storage...Within Vista these drives are seen as c:\ d:\ and f:\ respectively....I cannot boot to XP now with the ntldr type error discussed elsewhere...What do I need to delete to get VBP to load properly?
Windows Boot Manager
--------------------
identifier {4e1dafdf-e6c5-11da-8b13-bfd5e21a3b31}
device unknown
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {cbd971bf-b7b8-4885-951a-fa03044f5d71}
timeout 30
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=D:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {ntldr}
resumeobject {4e1dafe3-e6c5-11da-8b13-bfd5e21a3b31}
displayorder {ntldr}
{current}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Microsoft Windows Vista
locale en-US
inherit {bootloadersettings}
osdevice partition=C:
systemroot \Windows
resumeobject {0e741046-41b9-11db-a104-e1ac2e363c70}
nx OptIn
Resume from Hibernate
---------------------
identifier {0e741046-41b9-11db-a104-e1ac2e363c70}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filepath \hiberfil.sys
pae Yes
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {4e1dafe0-e6c5-11da-8b13-bfd5e21a3b31}
device unknown
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=D:
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
Windows Legacy OS Loader
------------------------
identifier {ntldr}
device unknown
path \ntldr
description Earlier version of Windows
Windows Legacy OS Loader
------------------------
identifier {4e1dafe1-e6c5-11da-8b13-bfd5e21a3b31}
device unknown
path \ntldr
description Earlier version of Windows
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Hello raakjoer and welcome to PROnetworks! As you can tell (I hope....) I've moved your post into its own thread and we recommend this when you have a problem you want solved, as it gets more attention with it's own space. Please stop by our Introduction Area so we can give you a proper welcome.
As to your issue, please be patient as our members pop in and check it out; enjoy the site!
raakjoer,
Welcome to PROnetworks.
Also, please see our latest topic about <a href="http://www.pro-networks.org/forum/viewtopic.php?t=82556&highlight=">How To Fix the Index Count Error</a>. If you still have specific problems please let us know and we will be more than happy to help.
HTH,
Jason
Welcome to PROnetworks.
Also, please see our latest topic about <a href="http://www.pro-networks.org/forum/viewtopic.php?t=82556&highlight=">How To Fix the Index Count Error</a>. If you still have specific problems please let us know and we will be more than happy to help.
HTH,
Jason
- jbullard
- VP - Software
- Posts: 3653
- Joined: Sun Jun 06, 2004 10:17 pm
- Location: Utah
- Real Name: Jason Bullard
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests