Anyone into modding
26 posts
• Page 3 of 3 • 1, 2, 3
by tWeaKmoD » Fri Apr 09, 2004 2:54 pm
Just a reminder to those who have been here and those who are new, check out or rig gallery http://www.pro-networks.org/forum/viewtopic.php?t=22029 If you have a sweet rig, please post pics here!!!!
by Huntnsinme » Thu Apr 29, 2004 2:39 pm
OK those pics are ok I guess they will do in a rush...
LOL those are some killer pics dude.
I would like to find out more about modding my own puter case and seeing some cd's spinning, thats cool, I have a little knowledge in the modding stuff category. I used to tear stuff apart to see how it worked, then put it back together in a different way to see what it would look like, even though I had to make some changes to do so..LOL
Good post. Rock on.
- Huntnsinme
- PROfessional Member
-
- Posts: 470
- Joined: Fri Feb 27, 2004 4:20 am
by Huntnsinme » Thu Apr 29, 2004 2:45 pm
as a matter of fact, I will start to draw out my design today sometime and figure out how I will put it together, I could use some corner beads .I will have to call Comp USA to see what they have for me to use first. 
This is going to be quite interesting. And fun. And hey thats the main thing right?
- Huntnsinme
- PROfessional Member
-
- Posts: 470
- Joined: Fri Feb 27, 2004 4:20 am
by clarksta3429 » Sat May 01, 2004 1:28 pm
i am into moddin heaps, we have a good place in Melbourne (Australia) that has a HEAP of modding supplies, i have the green Xide-Pad II (for those of you who dont know it is a gaming-mousepad with lights built under it), the LED Fans (3 of them) and cathodes-i am wanting to get a matrix orbital sometime in the future
AMD AthlonXP 2600+
Gigabyte GA-7VA M/B
512mb Hynix DDR400 PC3200RAM
GIGABYTE FX5200 128MB DDR Graphics Accelerator
Samsung 80GB 7200HDD
Seagate 40GB 5200HDD
LG 40*16*10 CDR/W
SAMSUNG DVD-ROM
Gigabyte GA-7VA M/B
512mb Hynix DDR400 PC3200RAM
GIGABYTE FX5200 128MB DDR Graphics Accelerator
Samsung 80GB 7200HDD
Seagate 40GB 5200HDD
LG 40*16*10 CDR/W
SAMSUNG DVD-ROM
- clarksta3429
-
- Posts: 3
- Joined: Sat Apr 24, 2004 10:42 pm
- Location: Melbourne (Vic) Australia
by PowerUser » Thu May 06, 2004 9:17 am
......or as ive heard someplace, running a system at factory spec is like kissing your sister, ya just DONT do it !! 
my machine as follows:
Shuttle AN35N-Ultra 400, single OCZ pc3200 256mb, xp2500 333fsb Barton core @xp3200...241x10=2.4ghz, 8,956 mips 3,721 mflops using Sandra, vcore 1.92 volts, cpu temp:102.2 f.
the system runs air cooled only,2 90mm, 3 80mm intake, 3 80mm exhaust, board temp in case:91.4 f
getting it to run is no simple task, dont have nice large power supply as i am a poor b*stard, so it runs off the 350watt Antec supply that came in my case, and a small 250watt AT supply that sits in my rom drive bay, powering case fans, rom drives, and hard drives.
my machine as follows:
Shuttle AN35N-Ultra 400, single OCZ pc3200 256mb, xp2500 333fsb Barton core @xp3200...241x10=2.4ghz, 8,956 mips 3,721 mflops using Sandra, vcore 1.92 volts, cpu temp:102.2 f.
the system runs air cooled only,2 90mm, 3 80mm intake, 3 80mm exhaust, board temp in case:91.4 f
getting it to run is no simple task, dont have nice large power supply as i am a poor b*stard, so it runs off the 350watt Antec supply that came in my case, and a small 250watt AT supply that sits in my rom drive bay, powering case fans, rom drives, and hard drives.
26 posts
• Page 3 of 3 • 1, 2, 3
Return to Hardware and Customizing
Who is online
Users browsing this forum: No registered users and 3 guests
