I am having the same trouble. "Index and count must refer to a location blabla....

My enum all is below...I have 2 drives, one 250GB with XP SP2 and a new install of Vista RC1 on it...The 2nd drive is just storage...Within Vista these drives are seen as c:\ d:\ and f:\ respectively....I cannot boot to XP now with the ntldr type error discussed elsewhere...What do I need to delete to get VBP to load properly?





Windows Boot Manager
--------------------
identifier {4e1dafdf-e6c5-11da-8b13-bfd5e21a3b31}
device unknown
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {cbd971bf-b7b8-4885-951a-fa03044f5d71}
timeout 30

Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=D:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {ntldr}
resumeobject {4e1dafe3-e6c5-11da-8b13-bfd5e21a3b31}
displayorder {ntldr}
{current}
toolsdisplayorder {memdiag}
timeout 30

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Microsoft Windows Vista
locale en-US
inherit {bootloadersettings}
osdevice partition=C:
systemroot \Windows
resumeobject {0e741046-41b9-11db-a104-e1ac2e363c70}
nx OptIn

Resume from Hibernate
---------------------
identifier {0e741046-41b9-11db-a104-e1ac2e363c70}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filepath \hiberfil.sys
pae Yes
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {4e1dafe0-e6c5-11da-8b13-bfd5e21a3b31}
device unknown
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=D:
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

Windows Legacy OS Loader
------------------------
identifier {ntldr}
device unknown
path \ntldr
description Earlier version of Windows

Windows Legacy OS Loader
------------------------
identifier {4e1dafe1-e6c5-11da-8b13-bfd5e21a3b31}
device unknown
path \ntldr
description Earlier version of Windows

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Hello raakjoer and welcome to PROnetworks! As you can tell (I hope....) I've moved your post into its own thread and we recommend this when you have a problem you want solved, as it gets more attention with it's own space. Please stop by our Introduction Area so we can give you a proper welcome.

As to your issue, please be patient as our members pop in and check it out; enjoy the site!

raakjoer,

Welcome to PROnetworks.


Also, please see our latest topic about How To Fix the Index Count Error. If you still have specific problems please let us know and we will be more than happy to help.

HTH,
Jason