If you had XP installed on the C drive initially, before installing Windows Vista, then that command should point to your C drive as indicated in Step 2 at the top of the thread I think:

bcdedit /set {ntldr} device partition=C:

Copy and paste the text on the first page that VistaBootPRO opens to here, so we can see how the BCD is set up at the moment and take it from there

By the way, welcome to PROnetworks trenskow

Sorry to hear that you are one of the unfortunates affected by that problem and we will do our best to help you get your XP install back again

Hi, and thanks for the welcome

I did as recommended

Rebooting, and booting on my xp install disk. Ran the fixboot, and then then restartet, and the computer started up in WinXP, so far so good.

Then i booted the install disk for vista, and using the system recovery, i did the startup repair.

Rebooting.

But no.. i get this error when trying to load winxp. Im having no trouble with Vista.

Quote:

File: \ntldr Status: 0xc0000002 Info: The selected entry could not be located because the application is missing or corrupt

Copy from VistaBootPro

Quote:

Windows Boot Manager -------------------- identifier {bootmgr} device partition=D: description Windows Boot Manager locale en-US inherit {globalsettings} default {default} resumeobject {4e1dafe0-e6c5-11da-8b13-bfd5e21a3b31} displayorder {current} {default} toolsdisplayorder {memdiag} timeout 10 Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Microsoft Vista x64 locale en-US inherit {bootloadersettings} bootdebug No osdevice partition=C: systemroot \Windows resumeobject {4e1dafe0-e6c5-11da-8b13-bfd5e21a3b31} nx OptIn pae ForceDisable nointegritychecks Yes sos No debug No Windows Legacy OS Loader ------------------------ identifier {default} device partition=D: path \ntldr description Microsoft Windows XP Proffesional

Whats next?

Regards
Rasmus

Copy bootsect.exe from the Program Files>PROnetworks>VistaBootPRO folder and paste it to the Windows\system32 folder of Vista

Then open the command prompt and run the following commands:

cd\

bootsect /NT60 ALL

Reboot and you should have both OS entries back and the entry to "Legacy" or "Earlier versions" should now take you to your XP installation.

Rasmus, please try the solution Grav!ty has prescribed above your post. Not every solution works for everyone and hopefully we can get you going again

kd1966 wrote:

Rasmus, please try the solution Grav!ty has prescribed above your post. Not every solution works for everyone and hopefully we can get you going again

Did it... got this error

Quote:

C:\>bcdedit /set {ntldr} device partition=C: An error occurred while attempting to reference the specified entry. The system cannot find the file specified. C:\>bcdedit /set {ntldr} device partition=D: An error occurred while attempting to reference the specified entry. The system cannot find the file specified.

Then i tried this.

Grav!ty wrote:

Copy bootsect.exe from the Program Files>PROnetworks>VistaBootPRO folder and paste it to the Windows\system32 folder of Vista Then open the command prompt and run the following commands: cd\ bootsect /NT60 ALL Reboot and you should have both OS entries back and the entry to "Legacy" or "Earlier versions" should now take you to your XP installation.

and got this response

Quote:

C:\>bootsect /NT60 ALL Target volumes will be updated with BOOTMGR compatible bootcode. C: (\\?\Volume{a0c6a1b5-3084-11db-8ad5-806e6f6e6963}) Updated NTFS filesystem bootcode. The update may be unreliable since the volume could not be locked during the update: Access is denied. D: (\\?\Volume{a0c6a1b4-3084-11db-8ad5-806e6f6e6963}) Updated NTFS filesystem bootcode. The update may be unreliable since the volume could not be locked during the update: Access is denied.

Any other ideas.
Regards
Rasmus

Try running that command bootsect /NT60 ALL again after disabling UAC by double clicking the username icon at the top right of the start menu and then selecting Security or Change security settings and uncheck UAC and then reboot before running the command.

If that still does not work, the only other thing I can think of for you to try is to go to the Bootloader tab of VistaBootPRO and then "Reinstall the Vista bootloader" and Apply.

You can also try copying all the boot system files (boot.ini, ntldr, NTDETECT.COM, Boot folder, bootmgr) to the root of both the XP and Vista drives/partitions and then running the bootsect /NT60 ALL command again

After that, if both installations are still not functional from the boot menu, I suggest you boot to Windows XP (I see you are able to do that by running fixboot from the XP recovery console) and then reformat your Vista drive and reinstall Vista.

Hi..

Turned of UAC, but still get the same errors when running these 2 commands.

Is there a difference in formatting drive from XP, or formatting the drive, during install of vista?

The reason i am asking this, that first when this error occured here, i did a reinstall of vista, but to no use, it didnt help.

Is there any files i should delete on the XP drive, which is drive C: when booted to XP?

Oh wow trenskow I wonder why nothing is working for your system. I must say you have given it a very good shot though. Check out Point 3 of this guide HOW TO: REMOVE WINDOWS VISTA FROM YOUR SYSTEM for the files that you would need to delete from your XP installation after reformating the Vista installation drive/partition from My Computer. You can try disk management to reformat but that sometimes gives a "drive in use" error