Does anyone know the command to reboot or shutdown a machine when programming with VB.net or C#.net? Or even just the actual application (if it is one ) that shuts down / reboots your machine?
Thanks in advance!

-Jonny

I am not much of a programmer in a Windows environment, but the dll you are going to want to call is rundll32.dll, pass a few parameters to rundll32.dll and you can shutdown, reboot, logout, etc . There are a couple similar ways of doing it.

http://listas.rcp.net.pe/pipermail/windows2000/2002-December/001652.html

There's a great link, will do a much better job explaining it than I can.

-Weaver

If you're running Windows XP you can do this (Note: You need to have admin-privelages to do this.):

From DOS Console

Code:

Usage: shutdown [-i | -l | -s | -r | -a] [-f] [-m \\computername] [-t xx] [-c "c omment"] [-d up:xx:yy]         No args                 Display this message (same as -?)         -i                      Display GUI interface, must be the first option         -l                      Log off (cannot be used with -m option)         -s                      Shutdown the computer         -r                      Shutdown and restart the computer         -a                      Abort a system shutdown         -m \\computername       Remote computer to shutdown/restart/abort         -t xx                   Set timeout for shutdown to xx seconds         -c "comment"            Shutdown comment (maximum of 127 characters)         -f                      Forces running applications to close without war ning         -d [u][p]:xx:yy         The reason code for the shutdown                                 u is the user code                                 p is a planned shutdown code                                 xx is the major reason code (positive integer le ss than 256)                                 yy is the minor reason code (positive integer le ss than 65536)

So if you wanted to restart (instantly) the command-line equiv. would be:

shutdown -r -t 0

Also, if your computer decides it wants to shutdown (like if SVCHost.exe was terminated, etc) you can use the -a switch to continue working.

I know that in C/C++ you can use: "system()", and whatever was in the parenthesis would be executed @ command-line...but I'm not sure if this holds true for C#... =/

Hope that helped =)

-Hari

try this C# example ...
http://www.dotnet247.com/247reference/msgs/9/49583.aspx